Pumps - cased pumps

600 series cased pump

Overview

630 series process pumps

630 series process pumps offer four drive options, color display and intuitive menu structures that provide visual status indication and minimal key presses.

Flow rates from 0.0002 GPM (0.001 L/min) to 4.76 GPM (18 L/min) depending on model and pumphead/tubing options.

Pumphead options available as standard (others available on request):

  • 620R pumphead for continuous tubing
  • 620RE and 620RE4 pumpheads for tube elements
  • 620L and 620LG twin channel low pulse pumpheads

Features and benefits

  • Remote Analogue/Digital, RS232, RS485, PROFIBUS, SCADA and EtherNet/IP™control options
  • Retractable rollers for easy tube loading and a rugged tool-lockable guard
  • 2650:1 speed control range from 0.1 to 265 rpm in 0.1 rpm increments
  • NEMA 2 (IP31) and NEMA 4X (IP66) cased pumps available
  • Keypad incorporates 3-level security PIN lock
  • Wide range of tube sizes and materials
  • Dual voltage, 115 V/230 V 50/60 Hz
  • One minute maintenance

Technical summary

Max. flow rate 18 L/min
Min. flow rate0.001 L/min
Max. flow rate301 USGPH
Min. flow rate0.02 USGPH
Drive speed control ratio2650:1 
Operating temperature range5 - 40 °C
Operating temperature range41 - 104 °F
Control typesEtherNet/IP™, Profibus, Remote Analogue/Digital, RS232, RS485, SCADA 
Drive standardsCE, cETLus, C-Tick, IRAM, NSF/ANSI 61 (for Marprene tubing and loadsure elements) 
Drive ingress ratingIP31, IP66, NEMA 2, NEMA 4X 
Drive power supply100-120 V/200-240 V 1ph 50/60 Hz 250 VA 
Compatible tubing bore size 6.4, 8, 9.6, 12, 12.7, 15.9, 16, 17 mm

Technical Summary table lists features available within the range. See ‘Technical specifications’ tab for model specific information.

Performance

Pumphead for continuous tubing

620R pumphead

  • Twin-roller pumphead for continuous 3.2mm wall tubing
Tube bore and flow rates — L/min (USGPH)
Tube material Speed 6.4mm 9.6mm 12.7mm 15.9mm
Marprene® TL, Bioprene® TL 0.1-265rpm 0.001–3.4 (0.02– 53.9) 0.003–6.6 (0.05– 105) 0.004–11 (0.06– 174) 0.005–12 (0.08– 190)
Pumpsil® 0.1-265rpm 0.001–3.2 (0.02– 50.7) 0.003–7.2 (0.05– 114) 0.004–11 (0.06– 174) 0.01–15 (0.16– 238)
GORE® STA-PURE® Pump Tubing – Series PFL, Neoprene 0.1-265rpm 0.001–3.2 (0.02– 50.7) 0.003–6.6 (0.05– 105) 0.004–11 (0.06– 174) 0.006–16 (0.1– 254)

Pumpheads for LoadSure element tubing

620RE/RE4 pumpheads

  • RE—two-roller pumphead
  • RE4—four-roller low pulse pumphead
  • LoadSure elements for use with quick release industrial or sanitary tri-clamp connections
Tube bore and flow rates — L/min (USGPH)
Tube material Speed 12mm 17mm
Marprene® TM, Bioprene® TM 0.1-265rpm 0.004–11 (0.06– 174) 0.01–16 (0.16– 254)
Marprene® TL, Bioprene® TL 0.1-265rpm 0.004–11 (0.06– 174) 0.01–18 (0.16– 285)
Pumpsil® 0.1-265rpm 0.004–10 (0.06– 159) 0.01–16 (0.16– 254)
GORE® STA-PURE® Pump Tubing – Series PFL, Neoprene 0.1-265rpm 0.004–11 (0.06– 174) 0.01–19 (0.16– 301)
620RE4 tube bore and flow rates — L/min (USGPH)
Tube material Speed 12mm 17mm
Marprene® TM, Bioprene® TM 0.1-265rpm 0.003–8.3 (0.05–132) 0.004–11 (0.06–174)
Marprene® TL, Bioprene® TL 0.1-265rpm 0.003–8.3 (0.05–132) 0.005–12 (0.08–190)
Pumpsil® 0.1-265rpm 0.003–8.7 (0.05–138) 0.004–11 (0.06–174)
GORE® STA-PURE® Pump Tubing – Series PFL, Neoprene 0.1-265rpm 0.003–9 (0.05–143) 0.005–13 (0.08–206)

Low pulse pumpheads

620L/LG

  • Twin-channel low-pulse pumpheads
Tube bore and flow rates — L/ min (USGPH) Y element tubing Continuous tubing (flow per channel - max of 2 channels)
Tube material Speed 8.0mm 12.0mm 16.0mm 8.0mm 12.0mm 16.0mm
Pumpsil® 0.1-265rpm 0.002–4.4 (0.03–69.7) 0.003–8.5 (0.05–135) 0.005–11.5 (0.08–182) 0.001–2.2 (0.02–34.9) 0.002–4.3 (0.03–68.2) 0.003–5.8 (0.05–91.9)
Marprene® , Bioprene® 0.1-265rpm 0.002–4.5 (0.03–71.3) 0.003–8.0 (0.05–127) 0.005–11.3 (0.08–179) 0.001–2.3 (0.02–36.5) 0.002–4.0 (0.03–63.4) 0.003–5.7 (0.05–90.3)
Neoprene 0.1-265rpm 0.002–4.6 (0.03–72.9) 0.003–7.7 (0.05–122) 0.005–13.3 (0.08–211) 0.001–2.3 (0.02–36.5) 0.002–3.9 (0.03–61.8) 0.003–6.7 (0.05–106)
GORE® STA-PURE® Pump Tubing Series PFL, GORE® STA-PURE® Pump Tubing Series PCS (620LG pumphead only) 0.1-265rpm 0.002–5.2 (0.03–82.4) 0.003–9.0 (0.05–143) 0.005–12.4 (0.08–197) 0.001–2.6 (0.02–41.2) 0.002–4.5 (0.03–71.3) 0.003–6.7 (0.05–106)

Specifications

Technical specifications

Drive with 620R PumpheadDrive with 620RE PumpheadDrive with 620RE4 PumpheadDrive with 620L PumpheadDrive with 620LG Pumphead
Pumphead number of rollers
Pumphead number of channels
Max. flow rate 16 L/min18 L/min13 L/min13.3 L/min13.3 L/min
Min. flow rate0.001 L/min0.004 L/min0.003 L/min0.002 L/min0.002 L/min
Max. flow rate254 usgph301 usgph206 usgph211 usgph211 usgph
Min. flow rate0.02 usgph0.06 usgph0.05 usgph0.03 usgph0.03 usgph
Max. flow rate4.76 usgpm4.76 usgpm4.76 usgpm4.76 usgpm4.76 usgpm
Min. flow rate0.0002 usgpm0.0002 usgpm0.0002 usgpm0.0002 usgpm0.0002 usgpm
Drive speed control ratio2650:1 2650:1 2650:1 2650:1 2650:1 
Drive speed 0.1 - 265 rpm0.1 - 265 rpm0.1 - 265 rpm0.1 - 265 rpm0.1 - 265 rpm
Operating temperature range5 - 40 °C5 - 40 °C5 - 40 °C5 - 40 °C5 - 40 °C
Operating temperature range41 - 104 °F41 - 104 °F41 - 104 °F41 - 104 °F41 - 104 °F
Weight19.6 - 20.5 kg19.6 - 20.5 kg20.1 - 21 kg24.3 - 25.2 kg24.3 - 25.2 kg
Weight43.2 - 45.2 lbs43.2 - 45.2 lbs44.3 - 46.3 lbs53.6 - 55.6 lbs53.6 - 55.6 lbs
Drive weight 16.5, 17.4 kg16.5, 17.4 kg16.5, 17.4 kg16.5, 17.4 kg16.5, 17.4 kg
Drive weight 36.4, 38.5 lbs36.4, 38.5 lbs36.4, 38.5 lbs36.4, 38.5 lbs36.4, 38.5 lbs
NEMA module weight0.9 kg0.9 kg0.9 kg0.9 kg0.9 kg
NEMA module weight2 lbs2 lbs2 lbs2 lbs2 lbs
Control typesEtherNet/IP™, Profibus, Remote Analogue/Digital, RS232, RS485, SCADA EtherNet/IP™, Profibus, Remote Analogue/Digital, RS232, RS485, SCADA EtherNet/IP™, Profibus, Remote Analogue/Digital, RS232, RS485, SCADA EtherNet/IP™, Profibus, Remote Analogue/Digital, RS232, RS485, SCADA EtherNet/IP™, Profibus, Remote Analogue/Digital, RS232, RS485, SCADA 
Drive humidity(Non-condensing) 80% to 31°C (88°F), decreasing linearly to 50% at 40°C (104°F) (Non-condensing) 80% to 31°C (88°F), decreasing linearly to 50% at 40°C (104°F) (Non-condensing) 80% to 31°C (88°F), decreasing linearly to 50% at 40°C (104°F) (Non-condensing) 80% to 31°C (88°F), decreasing linearly to 50% at 40°C (104°F) (Non-condensing) 80% to 31°C (88°F), decreasing linearly to 50% at 40°C (104°F) 
Drive noise<70dB(A) at 1m <70dB(A) at 1m <70dB(A) at 1m <70dB(A) at 1m <70dB(A) at 1m 
Max. altitude2000 2000 2000 2000 2000 
Compatible tubing bore size 6.4, 9.6, 12.7, 15.9 mm12, 17 mm12, 17 mm8, 12, 16 mm8, 12, 16 mm

Dimensions with 620R/RE/RE4 pumpheads

Dimensions with 620L/LG pumpheads

Materials of construction

BearingsCarbon steel
Drive caseworkPressure die-cast aluminum LM24, Pressure die-cast aluminum LM6
Guide roller assemblyMoS2 filled Nylon 6 (Nylatron), Stainless steel 303, Stainless steel 316
Pumphead front/back platesAluminum alloy HS30
Pumphead guardPressure die-cast aluminum LM24
Pumphead rotor assemblyAluminum alloy HE30
Pumphead trackAluminum alloy NS4 anodized, Powder coated aluminum LM24
SpindlesStainless steel 303S31
Switch-plateABS PA-765
Tube clamp assemblyAluminum alloy HE30, Polypropylene

Information listed covers the complete range. For detailed specifications of individual models/components refer to user manual or contact WMFTG representative.

Control

Control options

Key to pump drive models
630S 630SN 630U 630UN 630Du 630DuN 630Bp 630BpN 630US 630DuS 630En 630EnN
Standard Standard IP66 / NEMA 4X Universal Universal IP66 / NEMA 4X Digital Universal Digital Universal IP66 / NEMA 4X Bus Pump / Profibus Bus Pump / Profibus IP66 / NEMA 4X Universal SCADA / IP66 / NEMA 4X Digital Universal SCADA / IP66 / NEMA 4X EtherNet/IP EtherNet/ IP / IP66 / NEMA 4X
Manual control
Pump drive 630S 630SN 630U 630UN 630Du 630DuN 630Bp 630BpN 630US 630DuS 630En 630EnN
Intuitive keypad and color display
Choice of flowrate or speed display
Full calibration with choice of flow units
MemoDose function
Auto restart facility
Leak detection
Remote control
Pump drives 630S 630SN 630U 630UN 630Du 630DuN 630Bp 630BpN 630US 630DuS 630En 630EnN
Configurable Start/Stop, leak detector and pressure switch input via contact closure or 5V TTL or 24V industrial logic
Configurable Start/Stop, leak detector and pressure switch input via 110V industrial logic
Configurable Start/Stop and leak detector input via contact closure or 5V TTL or 24V industrial logic
Note: Does not include pressure switch
Direction change and auto/manual toggle input via contact closure or 5V TTL or 24V industrial logic
Direction change and auto/manual toggle input via 110V industrial logic
Remote operation of MemoDose (foot/hand‑switch or logic input)
Four configurable digital status outputs through 24V, 30W relays
Four configurable digital status outputs through 110V relays
Menu configurable logic outputs
Remote pressure/flow sensors
Analogue speed control
Pump drives 630S 630SN 630U 630UN 630Du 630DuN 630Bp 630BpN 630US 630DuS 630En 630EnN
Fully configurable inputs; 0-10V or 4-20mA
Analogue outputs; 0-10V, 4-20mA
Keypad/analogue input scaling (replacement of diaphragm pumps)
Tacho frequency output; 0-991Hz
2x sensor inputs 4-20mA*

*Range of 3rd party pressure/flow sensors supported - consult factory for list

Security
Pump drives 630S 630SN 630U 630UN 630Du 630DuN 630Bp 630BpN 630US 630DuS 630En 630EnN
3-level Security PIN lock
Network communication
Pump drives 630S 630SN 630U 630UN 630Du 630DuN 630Bp 630BpN 630US 630DuS 630En 630EnN
RS485 network control
RS232 network control
Digital pump commands (Profibus / EtherNet/IP)
Pump drives 630S 630SN 630U 630UN 630Du 630DuN 630Bp 630BpN 630US 630DuS 630En 630EnN
Profibus DP V0
Communication speeds from 9.6 kbits/s up to 12000 kbits/s
Baud Rate (MBPS) 10/100 Full/Half Duplex Operation
Auto-detect bus speed
Speed set point
Speed feedback
Flow calibration function
Hours run
Revolution counter
Leak detection
Low fluid level alarm
Diagnostic feedback
EtherNet/IP
Device Level Ring (DLR)
Flow Totalizer

Literature

Brochures

  1. Sanitary process pumps (US).pdf
    PDF - 1.9mb
  2. Industrial process pumps (US).pdf
    PDF - 1.4mb
  3. Ethernet IP (US).pdf
    PDF - 242.4kb

Datasheet

  1. 630 datasheet (EN).pdf
    PDF - 444.2kb

Manuals

  1. 630 Du-DuN manual (EN).pdf
    PDF - 4.9mb
  2. 630 S-SN manual (EN).pdf
    PDF - 2.8mb
  3. 630 Bp-BpN manual (EN).pdf
    PDF - 2.8mb
  4. 630 U-UN manual (EN).pdf
    PDF - 4.7mb
  5. 630 En-EnN manual (EN).pdf
    PDF - 3.8mb

Other Resources

  1. Watson-Marlow 530, 630, 730 EtherNet-IP™ compatible sensor list.pdf
    PDF - 203.2kb
  2. 530,630,730 Ethernet IP EDS compatibility guide.pdf
    PDF - 55.9kb
  1. 530,630,730 Ethernet IP EDS Rev 2.2.eds
    EDS - 113.3kb
  2. 530,630,730 Ethernet IP EDS Rev 2.1.eds
    EDS - 111.2kb
  1. PROFIBUS (GSD) 530-630-730 control file.gsd
    GSD - 2.6kb

Pumpheads

620RE LoadSure tube element pumphead

  • 620RE is a high-performance, accurate, two-roller pumphead with LoadSure rapid tube element change technology
  • 4mm wall elements in 12mm or 17mm bore sizes allow pressures up to 4bar and flow rates up to 18 liter/min
  • Elements are available with Tri-clamp sanitary fittings; and with Cam and Groove fittings

620RE4 LoadSure tube element pumphead

  • 620RE4 is a high-performance, accurate, four-roller pumphead with LoadSure rapid tube element change technology
  • 4mm wall elements in 12mm or 17mm bore sizes allow pressures up to 4bar and flow rates up to 13 liter/min with minimized pulsation
  • Elements are available with industry-standard tri-clamp sanitary fittings; and with Cam and Groove fittings for industry

620R continuous tubing pumphead

  • 620R pumphead accommodates 3.2mm wall continuous tubing in four bore sizes from 6.4mm to 15.9mm, giving up to 16 liter/min flow at up to 2bar pressure
  • Tubing is available in eight materials for almost any chemical requirement

620L low pulsation pumphead

  • 620L is a specialist 2bar, six-roller pumphead designed for accurate dispensing to ±0.5%. Minimal pulsation is achieved by splitting the inlet flow into two tubes passing over twin, offset tracks. The two sets of out-of-phase pulses cancel each other out when the channels merge
  • Uses 4.0mm wall Y-elements in a choice of six materials
  • Two single channels are also available
  • Tubing choices: 8mm, 12mm, and 16mm bore, offering flow rates from 0.002 to 12.4 liter/min
  • Dispenses 500ml in 3.5 seconds

Drives

Simple-to use HMI requiring minimal key presses to reduce chances of costly errors. Flow proportional to pump speed over 2,650:1 control range. IP31 wipedown pumps and IP66 cased pumps for washdown environments.

  • 630S - IP31 and 630SN - IP66 are simple, plug-in and switch on pumps offering economy of ownership. Ultimate process security with a 3 level PIN lock.
  • 630U - IP31 and 630UN - IP66 with all the features of the S/SN models, plus configurable inputs and outputs.
  • 630Du - IP31 and 630DuN - IP66 with configurable inputs and outputs, plus RS232 and RS484.
  • 630Bp - IP31 and 630BpN - IP66 with real time communication makes your process secure and flexible. Bus speed 9.6 kbits/s up to 12000 kbits/s connectivity
  • 630En - IP31 and 630EnN - IP66 EtherNet/IP connectivity for fast and easy access to pump data over Industrial Ethernet

Order Information

Product codes

620R

620R Continuous tubing
6.4mm 9.6mm 12.7mm 15.9mm
STA-PURE® Series PFL 966.0064.032 966.0096.032 966.0127.032 966.0159.032
STA-PURE® Series PCS 961.0064.032 961.0096.032 961.0127.032 961.0159.032
Bioprene® TL 933.0064.032 933.0096.032 933.0127.032 933.0159.032
Marprene® TL 902.0064.032 902.0096.032 902.0127.032 902.0159.032
Pumpsil® 913.A064.032 913.A096.032 913.A127.032 913.A159.032
Neoprene 920.0064.032 920.0096.032 920.0127.032 920.0159.032

620RE/RE4

620RE/RE4 Sanitary LoadSure™ elements (3/4" Tri-clamp PVDF connectors) Industrial LoadSure™ elements (3/4" Cam and groove PP connectors)
12mm 17mm 12mm 17mm
STA-PURE® Series PFL 966.0120.SST** 966.0170.SST**
STA-PURE® Series PCS 961.0120.PFT* 961.0170.PFT*
Bioprene® TM 933.P120.PFT* 933.P170.PFT*
Bioprene® TL 933.0120.PFT 933.0170.PFT
Marprene® TM 902.P120.PPC 902.P170.PPC
Marprene® TL 902.0120.PPC 902.0170.PPC
Pumpsil® 913.A120.PFT 913.A170.PFT 913.A120.PPC 913.A170.PPC
Neoprene 920.0120.PPC 920.0170.PPC

*4 bar pressure capability with STA-PURE, Bioprene® and Marprene® TM / **SST = sanitary stainless steel connectors

620L/LG

620L/LG Y element tubing Continuous tubing
Bore size (4.0mm wall thickness) 8.0mm 12.0mm 16.0mm 8.0mm 12.0mm 16.0mm
Pumpsil® 913.AE80.K40 913.A12E.K40 913.A16E.040 913.A080.040 913.A120.040 913.A160.040
Marprene® 902.E080.K40 902.E120.K40 902.E160.040 902.0080.040 902.0120.040 902.0160.040
Bioprene® 933.E080.K40 933.E120.K40 933.E160.040 933.0080.040 933.0120.040 933.0160.040
Neoprene 920.E080.K40 920.E120.K40 920.E160.040 920.0080.040 920.0120.040 920.0160.040
STA-PURE® Series PCS (for 620LG pumphead) 961.E080.K40* 961.E120.K40* 961.E160.K40*
STA-PURE® Series PFL (for 620LG pumphead) 966.E080.K40 966.E120.K40 966.E160.K40
Clamp set for continuous tube 069.4001.000

*4 bar pressure capability with GORE® STA-PURE® Pump Tubing – Series PCS elements (620LG pumphead only)

Recommended Products

  1. Marprene tubing

    Marprene tubing

    Thermoplastic elastomer tubing especially resistant to oxidizing agents. 23 ºF to 176 ºF (5 ºC to 80 ºC) to 100 psi.

    Tubing - peristaltic

  2. Pumpsil tubing

    Pumpsil tubing

    Platinum-cured silicone tubing with ultra smooth bore and excellent flow stability. -4 ºF to 176 ºF (-20 ºC to 80 ºC).

    Tubing - peristaltic

  3. GORE STA-PURE PFL tubing

    GORE STA-PURE PFL tubing

    Reinforced fluroelastomer tubing with extreme chemical resistance. -4 ºF to 176 ºF (-20 ºC to 80 ºC) to 60 psi.

    Tubing - peristaltic

Related Products

  1. 100 series cased pump

    100 series cased pump

    Flow rates to 3.04 GPH (190 ml/min) and pressures up to 30 psi. Speed control up to 10,000:1.

    Pumps - cased pumps

  2. 200 series cased pump

    200 series cased pump

    Flow rates from 6 μl/min to 22.0 ml/min. Multi-channel cassette pumps with up to 32 channels

    Pumps - cased pumps

  3. 300 series cased pump

    300 series cased pump

    Flow rates from 2 μl/min to 2000 ml/min and pressures up to 30 psi. Single or multi channel.

    Pumps - cased pumps

  4. 530 process pumps

    530 process pumps

    Flow rates to 55 GPH (3.5 L/min) and pressures up to 100 psi. Precise 2200:1 speed control range.

    Pumps - cased pumps

  5. 730 process pumps

    730 process pumps

    Flow rates to 8.8 GPM (33 L/min) and pressures up to 30 psi. Precise 3600:1 speed control range.

    Pumps - cased pumps