Pumps - sine pumps

Certa EHEDG pump

Overview

Certa process pumps

Engineers in food and beverage plants are frequently faced with pumping high viscosity products ranging from frozen orange juice, deli salads and bakery produce, to cheese curd and savory pie fillings. Certa meets the highest standards in hygiene and cleanability combined with improving process efficiency and minimizing total cost of ownership.

 Cleaner than any lobe or circumferential piston pump

  • EHEDG Type EL - Class I
  • Now with EHEDG Type EL Aseptic Class I
  • All contact parts FDA and EG1935 compliant

Virtually pulse free

  • Smooth product flow, no need for ancillary dampeners
  • Up to 1124 GPM, 8 million cP and 217 psi

 Low shear handling

  • Prevents aeration foaming
  • Virtually eliminates waste of raw ingredients

 Lowest cost of ownership

  • Reduced CIP cycle and reduced cleaning agents
  • Greatly reduced electricity consumption, reduced carbon footprint

 Energy efficient

  • Up to 50 % less power consumption than lobe or circumferential pumps
  • Higher energy efficiency at higher viscosities

Options and accessories

  • Pump jacketing available to maintain the duty fluid temperature
  • Static and dynamic flush systems available
  • Single mechanical seal or single mechanical seal with flush
  • Double mechanical seal, either flushed only or pressurized
  • Flush and double mechanical seal can be retrofitted without any modification

Features and benefits

  • Gentle product handling preserves high quality of product - superior viscous handling
  • EHEDG Type EL Class I - now also with EHEDG Type EL Aseptic Class I
  • Impressive suction capability: -12.3 psi (atm)
  • Low shear and virtually no pulsation
  • Outstanding energy efficient pumping principle - up to 50 % less power than other pumps
  • Only one shaft and one seal system - different port orientations available
  • Bi-directional running
  • Two year warranty

Technical summary

Max. flow rate255000 L/h
Max. flow rate1124 USGPM
Volume per revolution0.08 - 10.64 L
Volume per revolution0.021 - 2.81 USG
Max. operating pressure15 bar
Max. operating pressure217 psi
Max. particle size13 - 100 mm
Max. particle size0.51 - 3.9 in
Standards3-A, ATEX, EHEDG Type El Class I, EHEDG Type EL Class I Aseptic 
CertificationEC 1935/2004, FDA 

Technical Summary table lists features available within the range. See ‘Technical specifications’ tab for model specific information.

Specifications

Technical specifications

Certa 100Certa 200Certa 250Certa 300Certa 400Certa 500Certa 600Certa 800
Max. flow rate4800 L/h7800 L/h11520 L/h18000 L/h41760 L/h69120 L/h99000 L/h255000 L/h
Max. flow rate21.1 usgpm34.2 usgpm50.5 usgpm78.9 usgpm183.2 usgpm303.2 usgpm434.2 usgpm1124 usgpm
Volume per revolution0.08 L0.13 L0.24 L0.5 L1.16 L1.92 L2.75 L10.64 L
Volume per revolution0.021 usg0.034 usg0.063 usg0.132 usg0.305 usg0.505 usg0.724 usg2.81 usg
Max. operating pressure10 bar10 bar15 bar15 bar15 bar15 bar15 bar15 bar
Max. operating pressure145 psi145 psi217 psi217 psi217 psi217 psi217 psi217 psi
Max. particle size13 mm18 mm22 mm30 mm38 mm50 mm60 mm100 mm
Max. particle size0.51 in0.71 in0.87 in1.18 in1.5 in1.97 in2.36 in3.9 in
Max. operating speed1000 rpm1000 rpm800 rpm600 rpm600 rpm600 rpm600 rpm400 rpm
Max. operating temperature100 °C100 °C100 °C100 °C100 °C100 °C100 °C100 °C
Max. operating temperature212 °F212 °F212 °F212 °F212 °F212 °F212 °F212 °F
Max. SIP temperature 121 °C121 °C121 °C121 °C121 °C121 °C121 °C121 °C
Max. SIP temperature 250 °F250 °F250 °F250 °F250 °F250 °F250 °F250 °F
Shaft diameter28 mm28 mm28 mm50 mm50 mm50 mm65 mm110 mm
Shaft diameter0.98 inch0.98 inch0.98 inch1.97 inch1.97 inch1.97 inch2.56 inch4.33 inch
Shaft height95 mm109.5 mm150 mm170 mm200 mm250 mm255 mm405 mm
Shaft height3.74 inch4.31 inch5.91 inch6.69 inch7.87 inch9.84 inch10.04 inch15.94 inch
Standards3-A, ATEX, EHEDG Type El Class I, EHEDG Type EL Class I Aseptic 3-A, ATEX, EHEDG Type El Class I, EHEDG Type EL Class I Aseptic 3-A, ATEX, EHEDG Type El Class I, EHEDG Type EL Class I Aseptic 3-A, ATEX, EHEDG Type El Class I, EHEDG Type EL Class I Aseptic 3-A, ATEX, EHEDG Type El Class I, EHEDG Type EL Class I Aseptic 3-A, ATEX, EHEDG Type El Class I, EHEDG Type EL Class I Aseptic 3-A, ATEX, EHEDG Type El Class I, EHEDG Type EL Class I Aseptic 3-A, ATEX, EHEDG Type El Class I, EHEDG Type EL Class I Aseptic 
CertificationEC 1935/2004, FDA EC 1935/2004, FDA EC 1935/2004, FDA EC 1935/2004, FDA EC 1935/2004, FDA EC 1935/2004, FDA EC 1935/2004, FDA EC 1935/2004, FDA 
Port orientationVarious options to meet your requirements Various options to meet your requirements Various options to meet your requirements Various options to meet your requirements Various options to meet your requirements Various options to meet your requirements Various options to meet your requirements Various options to meet your requirements 
Port typeFlange, Milk fitting, RJT, SMS, TC Flange, Milk fitting, RJT, SMS, TC Flange, Milk fitting, RJT, SMS, TC Flange, Milk fitting, RJT, SMS, TC Flange, Milk fitting, RJT, SMS, TC Flange, Milk fitting, RJT, SMS, TC Flange, Milk fitting, RJT, SMS, TC Flange, Milk fitting, RJT, SMS, TC 

Dimensions

Pump size
Model Nozzles Foot Length Height Coupling
N1 N2 N3 F1 F2 F3 F4 F5 L1 L2 H1 H2 C1 C2 C3
mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in.
C100 139 5.47 85 3.35 10 0.39 120 4.72 135 5.31 Ø12 Ø0.47 143 5.63 57 2.24 265 10.43 50 1.97 95 3.74 129 5.08 Ø28 Ø1.10 8 0.31 31 1.22
C200 155 6.10 99.5 3.92 10 0.39 120 4.72 135 5.31 Ø12 Ø0.47 167.5 6.59 81.5 3.21 298.5 11.75 50 1.97 109.5 4.31 145 5.71 Ø28 Ø1.10 8 0.31 31 1.22
C250 191.5 7.54 138.5 5.45 11.5 0.45 190 7.48 175 6.89 Ø17 Ø0.67 219 8.62 84 3.31 352 13.86 50 1.97 150 5.91 180 7.08 Ø28 Ø1.10 8 0.31 31 1.22
C300 237.5 9.35 152.5 6.00 17.5 0.69 250 9.84 215 8.46 Ø20 Ø0.79 285 11.22 154 6.06 455.5 17.93 80 3.15 170 6.69 220 8.66 Ø50 Ø1.97 14 0.55 53.5 2.11
C400 323.5 12.74 169 6.65 31 1.22 266.5 10.49 254 10.00 Ø21 Ø0.83 301 11.85 169 6.65 513.5 20.22 77 3.03 200 7.87 292.5 11.52 Ø50 Ø1.97 14 0.55 53.5 2.11
C500 326.5 12.85 225 8.86 25 0.98 320/230 12.6/9.06 295 11.61 Ø26 Ø1.02 323 12.72 129.5 5.10 564 22.20 77 3.03 250 9.84 301.5 11.87 Ø50 Ø1.97 14 0.55 53.5 2.11
C600 343 13.50 227 8.94 28 1.10 320/230 12.6/9.06 295 11.61 Ø26 Ø1.02 362.5 14.27 169 6.65 638.5 25.14 110 4.33 255 10.04 315 12.40 Ø65 Ø2.56 18 0.71 69 2.72
C800 535 21.06 367 14.45 38 1.50 480 18.9 500 19.69 Ø32 Ø1,26 372 14.65 72 2.83 807 31.77 145 5.71 405 15.94 497 19.57 Ø110 Ø4,33 28 1.10 116 4.57

Materials of construction

HousingStainless steel 1.4404, Stainless steel 316L
Bearing frameStainless steel 1.4301, Stainless steel 304
RotorA494, CY5SnBiM
GatePolyamide
Seals/gasketsEPDM, FKM
Shaft sealPTFE, SSIC

Literature

Brochures

  1. Certa pump (US).pdf
    PDF - 931.3kb
  2. Certa pump aftercare (EN).pdf
    PDF - 160kb

Datasheet

  1. Masosine Certa datasheet (EN).pdf
    PDF - 426.1kb

Manuals

  1. Certa pump COP addendum (EN).pdf
    PDF - 812.8kb
  2. Certa pump manual addendum (EN).pdf
    PDF - 1.8mb
  3. Certa 800 pump manual (EN).pdf
    PDF - 5.1mb
  4. Certa pump manual (EN).pdf
    PDF - 1.6mb

Other Resources

  1. Certa 100 to 600 Mee sustainability curves (US).pdf
    PDF - 4mb
  2. Certa 800 Mee sustainability curves (US).pdf
    PDF - 146.2kb

Certification

The European Hygienic Engineering & Design Group (EHEDG) is a consortium of equipment manufacturers, food industries, research institutes as well as public health authorities and was founded in 1989 with the aim to promote hygiene during the processing and packing of food products. More

3-A SSI is an independent, not-for-profit corporation dedicated to advancing hygienic equipment design for the food, beverage, and pharmaceutical industries.

FDA is responsible for protecting the public health by assuring the safety, efficacy and security of human and veterinary drugs, biological products, medical devices, our nation’s food supply, cosmetics, and products that emit radiation.

REGULATION (EC) No 1935/2004 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 October 2004 on materials and articles intended to come into contact with food

ATEX Directive (2014/34/EU): Machinery and equipment manufacturers, their authorized representatives, importers, or any persons responsible for placing a product on the market, must ensure that equipment falling under the ATEX Directive (2014/34/EU) prevents, or limits the impact to an adequate level of safety, an ignition of explosive atmospheres. As a visible sign of compliance with ATEX, the CE marking must be affixed to the equipment.

Take a tour

Videos

Certa animation

 

Certa cut away

 

Certa clean in place

 

The video shows the MasoSine Certa pumps’ ability to clean in place even the toughest substances. For the purposes of this demonstration, mustard has been pumped and allowed to dry. Just cold water without a cleaning agent is then run through the pump, removing all traces of the mustard with ease.

Certa pumps are:

  • Designed for CIP cleaning and SIP sterilization
  • Cleanability proven by EHEDG and 3A
  • Food compliance materials: FDA and EG 1935

Maintenance Videos

Certa - Assembly

 

Certa - Dismantling

 

Certa - Changing pump orientation

 

Related Products

  1. SPS pump

    SPS pump

    Low shear pumping with flow rates to 434 GPM and pressures up to 217 psi.

    Pumps - sine pumps